Nationwide coverage 
Fast delivery 
24-hour service 
Worldwide locations 
Jetting Pump is an exhaust primed centrifugal pump with 75mm (3") suction and discharge connections. In standard form the pump is coupled to a Lister TR3 air cooled diesel engine and is mounted on two wheeled site trailer.
Key Features
- Capable of a total head of over 100m (328ft)
- Rapid self priming down to 6m (20ft)
- Single stage, therefore not affected by problems associated with multi stage pumps
- Light compact design, ideal for site manoeuvring
- High Efficiency
- Grease lubricated spring loaded mechanical seal
- Corrosion resistant seal rings
Environments
- Environmental
- Emergency Pumping Services
- Docks, Ports and Harbours
- Refineries
- Water and Waste Treatment
- Local Authorities
- Film Production and Events
- Offshore and Float Outs
- Quarries and Mines
- Building and Construction
- Manufacture and Industry
- Power Stations
- Tunnelling
- Agriculture
Accessories
- 2.5 INCH X 60FT JETTING HOSE
- JETTING STRAINER
- 4" X 3M W/A BAUER HOSE
- 4" 20FT W/A SUCTION HOSE BAUER
- 4" 20FT POLYTUBE
- 4" X 6MTR STEEL BAUER PIPE
- DRIP TRAY 2440MM X 1525MM
- DRIP TRAY 2058MM X 1525MM
- RETAIL GAS OIL
- BUNDED FUEL TANK 1000 LITRE
- BUNDED FUEL TANK 2000 LITRE
- BUNDED FUEL TANK 3000 LITRE
- 5M HP FUEL LINE
Specifications
- Weight (kg)
- 457 kg without fuel
- Dimension (mm)
- 2000 x 860 x 1400
- Noise level
- @1m= 94-98 dBA @7m= 77-82 dBA
- Performance
- Max head
- Fuel Tank Capacity
- 90lts, maximum 24hr with cleaning and flushing facilities
- Fuel Consumption
- full load @2800 rpm, 6.2ltrs/hr
- Chassis
- 2 wheeled site trailer
- Pump Materials
- Enclosed type Impeller for high efficiency, close grain Cast iron volute with 3” BS table D flanged adaptor
- Pipe Connections
- Suction
- Engine
- Lister TR3 air-cooled diesel engine
- Prime System
- Manually operated exhaust activated
- Shaft Seal
- Mechanical grease lubricated