Return to our home page
Sykes pumps for all environments rotating banner

Pumps range

General purpose pumps

For sustained performance and reliability, for all dewatering and general pumping applications, these pumps are hard to beat, handling everything from clean water to sludge. Our WP150 and GP150 pumps are the most popular units for hire and sale.

Electric submersibles

Pumpex units for dewatering, drainage and sludge are the best available. Fully portable, they provide hours of unattended operation.

Super silenced

We have raised the bar in low-noise pumping without compromising on power, reliability and flexibility: noise levels are set at a maximum of 62 decibels at seven metres.

Submersible borehole pumps

These powerful slim-line pumps are in their element underwater: easy to submerge, they deliver reliable high performance at great depths.

Telemetry Monitoring

The next ‘big thing’ in pumping, particularly for Deep Well projects: installing TM systems means we can provide you with more control, more reliability, less downtime and lower costs.

Custom built

Because we are part of the Andrews Sykes Group, we can build-to-order whatever you need for specific applications.

Sales and Accessories

Many pumpsets including groundwater equipment are available to buy. The range is backed up by an array of accessories including lay flat hoses, pipes and tubing, plus generators and cost-effective fuel supplies.

Sales and Accessories

In addition to our hire fleet and contract equipment, pumps are available for purchase. We maintain an average stock holding of 25 new dewatering pumpsets plus all associated accessories for sale. We can put together complete packages based on your requirements.

  • Univac general purpose pumps
  • ‘MX’ series in cast iron and stainless steel
  • Pumpex electric submersible pumps
  • Plus spare parts for all of these units
General purpose
GP 50/75 GP 80 GP 100M GP 150M
GP 200M UNIVAC 3H
Medium & High head
MH 100 MH 150 UVO 150/100E UVO 200/150F (D70)
   
UVO 200/150F (C90) DRC 150/150    
Submersible drainer pumps - l/s = litres per second
P 601 Submersible drainer pump
Max flow 80l/s 		P 701 Submersible drainer pump
Max flow 12l/s 		P 1001 Submersible drainer pump
Max flow 20l/s 		P 1501 Submersible drainer pump
Max flow 25l/s
P 2001 Submersible drainer pump
Max flow 45l/s 		P 3001 Submersible drainer pump
Max flow 65l/s 		PX 12 Submersible drainer pump
Max flow 100l/s 		PX 20 Submersible drainer pump
Max flow 155l/s
PX 30 Submersible drainer pump
Max flow 325l/s 		PC 1001 & PC 1501 Submersible drainer pump
Max flow 20l/s & 25l/s 		PC 2001 Submersible drainer pump
Max flow 35l/s 		PC 3001 Submersible drainer pump
Max flow 55l/s
Submersible Borehole pumps
   
S 100 B UPA 100 C    

Accessories, generators and fuel

Hoses
Sykes Pumps offers the most comprehensive range of hoses to accompany our pump range. We stock Wire Armoured – suction hose, Heliflex, Poly Tube delivery hose, Heavy Duty Hose, High Pressure Hoses, Galvanised Steel Pipe, Lay flat delivery hose and High Pressure Lay flat hose.


Fittings
We provide both Quick Release Couplings together with Intakes and Strainers. Simple, speedy and secure, Sykes quick release couplings enable rapid connections of suction and discharge lines. In addition we also offer various intakes and strainers that are available for a number of applications.


Panels
Along with a comprehensive range of submersible pumps, Sykes also offer a full selection of control panels. The panels enable the user to leave pumps unattended for long periods whilst improving safety; efficiency and reducing wear on the pump.



Settlement
Sykes offer a range of settlement tanks to be used on the discharge side of any pump set. These tanks are specially designed to prevent silt and fines being discharged into the water course or drains. Each tank is provided with a series of weir plates, Bauer quick release couplings, lifting eyes and drain plugs.


Drip Trays
Drip trays can be provided with most pumps to avoid environmental pollution due to fuel spillage or oil spillage when refuelling or maintaining the pump set. Even if the pump has a built in drip tray an additional full length tray gives extra protection. Environmental authorities would insist on using drip trays whilst working close to waterways or when there is a risk of water pollution

Fuel Tanks
The safe transportation and storage of fuel, especially in environmentally sensitive areas, is an increasing concern for all. Sykes offers a purpose built range of fully bunded fuel tanks for hire with a capacity range from 1000 to 3000 Litres. Fully compliant and tested to ADR and UN requirements for IBC, all manufactured under ISO 9001: 2000 requirements.

Click on the images to view our range of Ancillary pipework and fittings
Galvanised steel. Impact resistant PVC

Our range of ancillary pipe work and fittings is second to none. We offer a choice of either light, impact resistant PVC or lightweight galvanised Steel. Plus a complete range of disposable and permanent Wellpoints, jetting heads and hoses, risers and surface header pipes.


Whether hiring or buying, the Khansaheb Sykes range is complemented by an unbeatable array of high performance hoses, pipes and tubing, and other accessories:

  • Khansaheb Sykes branded Suction and Delivery Hoses
  • Lay Flat Discharge Hoses
  • Bauer Galvanised 'Quick Action' Hose Couplings
  • Millars Galvanised 'Quick Action' Hose Couplings and Fittings
  • Wellpoint Dewatering Accessories - Header Pipes

At the same time, we also provide an increasing number of customers with generators plus cost-effective fuel supplies.

Please call Khansaheb Sykes on 00971 653 43453 to discuss any requirements you have. Or click here to contact us now.

  • Price competitive
  • Experts in groundwater control and dewatering
  • The largest range of pumps and ancillary equipment available
  • A fast and friendly service: national coverage across the UAE